How to Hang Keter Hanging Planters on a Fence or Wall

By Keter - Outdoor Storage Solutions: Sheds, Deck Boxes, and More | Published: 2026-10-23

Category: How-to Guides

Learn step-by-step how to install Keter hanging planters on a fence or wall, with tips for choosing the right hardware and avoiding common mistakes.

Quick answer

To hang Keter hanging planters on a fence or wall, choose a sturdy mounting point, use the right hardware for the surface, and secure the planter at a slight angle for best drainage and visibility.

Why mounting location matters

The spot you choose affects both the health of your plants and how long the planter lasts. Full-sun spots dry out faster, while shaded walls can lead to overwatering. Also, consider how the planter will look from inside and outside your home.

Keter hanging planters are made from resin that resists weather, but the hardware you use must match the surface. A wooden fence needs different screws than a brick wall, and using the wrong type can lead to the planter pulling away over time.

Weight and drainage considerations

A planter filled with wet soil can be surprisingly heavy. Before you mount, estimate the total weight and make sure your hardware can handle it. If you're unsure, choose a bracket rated for more weight than you expect.

Drainage is also key. Keter hanging planters have drainage holes, but water will drip from them. Position the planter so water falls onto a surface that won't be damaged, or add a drip tray if needed.

Step-by-step installation guide

Choose the mounting spot: Select a fence or wall location that gets the right amount of sunlight for your plants. Check that the surface is solid and free of cracks or rot. Avoid spots where water from the planter will hit electrical outlets or wooden surfaces that could stain.
Gather tools and hardware: You'll need a drill, appropriate screws or anchors for your surface (wood screws for fences, masonry anchors for brick or concrete), a level, and a pencil. Use stainless steel or coated hardware to prevent rust and staining on the planter.
Mark the bracket holes: Hold the planter or its bracket against the wall, use a level to ensure it's straight, and mark the screw holes with a pencil. Double-check that the marks are level before drilling; a crooked planter is hard to fix later.
Drill pilot holes and install anchors: Drill pilot holes slightly smaller than your screws. For masonry, insert wall anchors. For wood, you can skip anchors but pilot holes prevent splitting. Pilot holes make the screws easier to drive and reduce the risk of cracking the surface.
Secure the bracket or hanger: Attach the bracket or hanger to the wall using the screws. Tighten firmly but avoid over-tightening, which can strip the holes. Test the bracket by pulling it gently before hanging the planter.
Hang the planter and check stability: Place the planter on the bracket or hook, then add soil and plants. Give it a gentle tug to ensure it's stable. Re-check the stability after watering, as wet soil adds significant weight.

Product facts

Ensemble de deux jardinières suspendues - Brun: This set of two Keter hanging planters features a timeless rattan design in a neutral brown color, made from weather-resistant resin. The resin construction is lightweight yet durable, making it easy to mount on a fence or wall while withstanding outdoor conditions.
Ensemble de deux jardinières suspendues - Brun