How to Assemble Corfu 4-Piece Patio Seating Set

Quick answer

Assemble your Corfu 4-piece patio seating set by first laying out all parts and hardware, then building the table, followed by the sofa and armchairs, and finally attaching the cushions.

Assembly steps

1. Step 1: Unpack and organize: Remove all parts from the boxes and lay them out. Separate the hardware bags by label (table, sofa, armchair). Verify you have all pieces using the parts list in the manual. Missing a part? Check inside the box flaps and under packing foam before contacting support.
2. Step 2: Assemble the table: Attach the four table legs to the tabletop using the provided bolts. Tighten each bolt firmly but do not overtighten, as resin can strip. Flip the table upright. Common mistake: Overtightening bolts can crack the resin. Stop when snug.
3. Step 3: Build the sofa frame: Connect the sofa side panels to the back panel using the included screws. Then attach the seat panel and front rail. Ensure all tabs click into place before inserting screws. Check that the side panels are oriented correctly—the armrest curve should face forward.
4. Step 4: Build the armchairs: Repeat the same process for each armchair: attach side panels to the back, then add the seat panel. The armchairs have a smaller footprint, so the panels are shorter. Do not mix sofa and armchair parts—they look similar but have different dimensions.
5. Step 5: Attach cushions and final check: Place the seat cushions onto each seat. Ensure the cushion straps (if present) are tucked under the seat panel. Tighten any loose screws and wipe down the frames. Cushions are not waterproof—store them indoors or in a deck box when not in use.

Product details

• Corfu 4-Piece Patio Seating Set - Graphite: The Corfu set combines sleek, contemporary design with the cozy feel of natural rattan-inspired weaving. The woven texture is purely aesthetic and does not affect assembly, so you can focus on the structural connections without worrying about damaging the finish.